How to Fix Boot Error, PXE-E61 Media Test Failure Check Cable

Have you ever encountered the PXE-E61 Media Test Failure Check Cable error during system boot? If so, you’ve found the right page for the ideal solution. This article will guide you through the steps to resolve the boot error associated with media test failure. The process is straightforward and not overly complicated. Additionally, the solution provided here can address not only the PXE-E61 error but also the PXE-M0F error. Below, you will find details on these error codes and how they might display on your machine.

PXE-E61: Media test failure, check cable

or

PXE-M0F: Exiting PXE ROM

These error indicates the issue with your machine’s PXE also known as Preboot Execution Environment. This error comes when the system’s boot sequence or BIOS is not configured properly. There might be some issues with reading your hard drive and in the result this error can pop up.

Resolving Media Test Failure: Check Your Cable

To fix the “Media Test Failure, Check Cable” boot error, follow these steps:

1. Power on your device and enter the BIOS setup.
2. Navigate to Boot Options and ensure the Boot Sequence isn’t configured for network boot. Make sure your hard drive appears in the boot sequence options. If it’s listed, set it as the first device in the boot order.

If your hard drive doesn’t appear in the boot sequence, it might not be connected properly, or it could be damaged. Open the back of your laptop or the side case of your desktop to check the connection. A loose or defective SATA cable could be causing the issue. Try reconnecting the cable or replacing it with a new one to resolve the problem.

Related: How to Hack a Computer Remotely with MSFVenom

If you’re having a laptop and don’t know how to fix it, consult an professional technician to fix the issue.

• Sometimes this issue also pops up due to mis-configuration of the jumpers. You can check it the jumpers are connected properly or not. If you own a laptop this might be hard for you to check how to fix jumpers. In that situation, you should visit a pro technician.
• Go to your BIOS setup and run a self test for hard drive in the diagnostics options.
• If all of the above options doesn’t fix boot error for media test failure check cable issue, then you can try resetting the BIOS settings to the default settings.

Conclusion

Resolving the PXE-E61 Media Test Failure error can seem daunting, but following these straightforward steps should help you get back on track. Start by checking your BIOS settings and boot sequence to ensure your hard drive is recognized correctly. Reconnecting or replacing any loose or defective cables may also resolve the issue. If these steps don’t work, inspecting jumpers and running a hard drive self-test can offer further insights. For persistent problems, resetting the BIOS or consulting a professional technician might be necessary.

By addressing these potential causes systematically, you can troubleshoot and fix the PXE-E61 error effectively.

Hope you will find this article helpful.